Categories
WordPress

11 Ways to Upgrade Your Wi-Fi and Make Your Internet Faster

Whether you’re working from home, binge-watching Netflix, or streaming your gameplay on Twitch, there’s no such thing as too much bandwidth. Even if you have gigabyte fiber mainlined into your router, everyone could use help getting faster internet around the house. It doesn’t matter if you have the best possible wires outside your house—eliminating subpar speeds and Wi-Fi dead zones is largely up to you. To help, we’ve put together some suggestions on ways to troubleshoot and, hopefully, improve the quality of the Wi-Fi inside and outside your place.

Be sure to check our guides for more, including our how-to on securing your home Wi-Fi network, our router buying guide, an explainer on Wi-Fi 6, and our gear guide for working at home.

Updated August 2021: We’ve added some new routers, updated prices, and added more buying advice to this guide.

Special offer for Gear readers: Get a 1-Year Subscription to WIRED for $5 ($25 off). This includes unlimited access to WIRED.com and our print magazine (if you’d like). Subscriptions help fund the work we do every day.

If you buy something using links in our stories, we may earn a commission. This helps support our journalism. Learn more.

1. Move Your Router

That router in the closet? Not a good idea. Walls, cupboards, even bookshelves can potentially dampen your Wi-Fi signal. Physically moving the router can make a real difference to the speeds you get and how far its wireless transmissions can reach. The perfect spot will depend on your home, but try not to hide your router in a corner or under a cupboard or inside a drawer—the more central and prominent it is, the better. For more info, read our guide to where to put your router for the best possible home Wi-Fi.

You might need to apply some creative cabling to get your router in a better place, but it’s going to be worth the effort for the end results. The goal is to get your main devices—consoles, laptops, and so on—as close as possible to your router. Devices that don’t need quite so much bandwidth, like smart thermostats, don’t have to be a priority in terms of physical proximity.

If you don’t have a flat surface near the best spot, you can mount your router halfway up a wall. If possible, keep it away from other devices that use electromagnetic waves; that includes baby monitors, wireless keyboards, and even microwaves.

2. Use an Ethernet Cable

Ethernet. It still works.

Photograph: Eskay Lim/Getty Images

We sometimes forget: Wires still exist! You don’t need Wi-Fi. A wired connection to your router is usually preferable to a wireless one. It’s faster and more stable and can’t be affected by other devices or large fish tanks. The downside is that it limits where your devices can be, and it’s less convenient overall.

Still, for hardware that needs the fastest internet possible—a gaming console, desktop PC, or a streaming box, for example—it’s often well worth the effort to run a wire. The router will have a handful of Ethernet ports to spare, so all you need is a cable.

To do a really tidy job and avoid having wires trailing across your floor, you’ll need to deploy some cable management. Small brackets like these ($13 for a pack of 40) keep the Ethernet cable fixed to the walls. If you have several cables running in the same direction, these wall mounts ($10 for a pack of 50) work well. For one or two gadgets, it can be worth the extra setup.

3. Change the Channel or Band

Wi-Fi signal is divided into channels. Your router uses a particular Wi-Fi channel to communicate with the devices around your home, and if you have neighbors living very close who have routers using the same Wi-Fi channel, then everything can get congested quickly. Switching channels can solve this problem.

Every router will handle this differently. Check its documentation or look up the instructions online if you’re not sure, but you should be able to find the option somewhere in the device settings. Channels 1, 6, and 11 are the ones to try, as they’ll have the least interference when multiple devices get hooked up.

Most routers now use dual-band technology, broadcasting at the 2.4-GHz and 5-GHz frequencies. If your router settings allow you, you might be able to prioritize one or the other for certain devices—the 5-GHz band will get you a faster connection to the internet, though it has a shorter range than 2.4 GHz. We suggest leaving both frequencies enabled since older devices will often work only on 2.4 GHz.

4. Upgrade Your Router

Netgear Nighthawk AX8

Photograph: Amazon

Routers vary significantly in functionality and price, but in this case, the upgrade to make is generally in terms of how far your Wi-Fi is broadcast. If you have a large house, you’re likely better off with a router that can pair with “repeaters” that broadcast signals into the farthest reaches of your home. Smaller homes and apartments can generally get by with a simpler system. Read our router buying guide for more details.

Routers we’ve tested and like:

For larger homes, we recommend a mesh network, where you install multiple router nodes around your house.

Mesh network systems we like:

Vilo Mesh Router

Photograph: Vilo

There’s also the Google Nest Wifi system, which works well even though it lacks some features found in the other systems, and at $287 (Amazon) it’s not one of the cheaper options. At the other end of the spectrum is the new Vilo Mesh Wi-Fi System. You can buy a single Vilo mesh router for $20. If you need more coverage, a three-pack is $60. The downside is there’s no support for Wi-Fi 6. If you have a lot of brand-new devices that support Wi-Fi 6, that might be a deal breaker. We also found that some devices needed to be closer to the Vilo routers than on other systems. Still, if you’re on a tight budget, the Vilo might be the answer.

5. Get a Wi-Fi Extender

If messing around with your router settings seems too daunting, and you have a few dollars to spare, invest in a Wi-Fi extender or repeater. These devices plug into a spare wall socket, connect to the wireless internet getting beamed out by your router, and then extend it.

They’re (usually) simple to set up, easy to use, and can instantly get rid of Wi-Fi dead zones in your house. The extended or repeated wireless signals won’t be as strong as the ones coming straight from your router, so again, positioning is important. Try to use these devices to connect gadgets that don’t need a huge amount of bandwidth.

You’ve got plenty of options: Take a look at the Linksys AC1900 or the Netgear EX7300, for example. Make sure the maximum supported Wi-Fi standard (e.g., 802.11ac) matches that of your router so you get as speedy a connection as possible.

6. Use Your Electrical Wiring

TP-Link Powerline

Photograph: Amazon

An alternative to extenders is a powerline kit. Digital signals can pass through electrical wiring, and powerline devices are designed to take advantage of this. Several manufacturers make powerline networking kits, including Netgear ($110, Amazon) and TP-Link ($60, Amazon).

It works like this: You connect a powerline plug to your router, then put the plug into a wall socket. Add another powerline plug in any other room in your house, and it can provide a wired or wireless connection to that room. There will be some drop in speed, but it’s a simple and effective option. Unless your home is particularly old, it should have electrical wiring that supports this, but it’s best to buy your kit from a retailer with a robust return policy just in case.

7. Add a Password to Your Wi-Fi

We probably don’t have to tell you this, but you need a password on your Wi-Fi network. It’s good for keeping hackers away and keeping neighbors from Netflixing off of your bandwidth, which will definitely slow you down. Make sure you use AES encryption, which is both the most secure and most speed-friendly security option.

8. Cut Off Unused Devices

Having dozens of things tapping into the Wi-Fi at once can be problematic. Plug anything you can into Ethernet, and unplug anything you have connected but don’t need (like that “smart” tea kettle you never once got to work). Make sure only the things that need internet get internet.

Good routers (all of the routers listed above, for example) offer controls to prioritize a particular device or service. It’s a handy way to make sure your games never get interrupted by someone else streaming videos on Facebook.

9. Check Your PC

This tip is specific to computers: If the internet on your PC or laptop is perpetually slow, but other devices seem fine, open your Task Manager or Activity Monitor and see which programs are running in the background. Certain programs could be set to auto-update that don’t need to be. If they’re always updating in the background, that could be the cause of your slow internet. Check it out and adjust the settings.

10. Restart Your Router?

We’ve read this tip many times on the web, but we were skeptical. Restarting your router on a regular basis sounds like an extension of the age-old pseudo solution to everything digital: Reboot it. Yes, we know restarting your router can sometimes fix dead internet, but we asked router maker Netgear: Does regularly rebooting your router help speed things up? The short answer is, probably not.

Sandeep Harpalani, vice president of product management at Netgear, says the company does not recommend rebooting its routers “unless you actually encounter issues with connectivity or slowdowns due to radio frequency interference.” He adds that if you’re still using 2.4-GHz Wi-Fi and you’re having speed troubles, rebooting might help, since it will force the router to choose the best channel with the least interference during boot-up. If you’ve made the jump to 5 GHz, it will automatically switch to the channel with the least amount of interference.

Either way, there’s no reason to reboot regularly, the way some people have suggested. If you are having problems, then it may be worth restarting your router, but for the most part, stick with our other tips.

11. Call Your ISP

If you’ve tried it all and still have problems, you can always contact your internet provider. They may want to send a service technician out. They might be able to pinpoint an overlooked issue that is getting in the way of you and fast Wi-Fi. With the ongoing pandemic, you may not want strangers in your house, and your ISP may not have technicians available to send. Still, if none of the rest of these tips solve your problem, it’s time to reach out to your provider to ask some questions.


More Great WIRED Stories

Leave a Reply

Your email address will not be published. Required fields are marked *